SCT-32-W Adjustable Treaded Watertight Pipe and Duct Tethered Inspection Robot
This custom tracked robot is our easy to use solution for inspecting pipes, culverts, etc with Ø255 ID or larger.
Technical Specifications
| TP-632-020 | |
| Operation Time | 3 hours |
| Min Pipe | Ø255 |
| Tether Cable Length |
152m |
| Camera System |
PTZ dome camera 10X optical zoom |
| Speed |
Up to 14m per minute |
| Lights |
LED Lights |
| Weight |
5kg |
| Dimensions | 67cm L x 18cm (or 29cm) W x 20cm H |
The Treaded Waterproof Pipe and Duct Inspection Robot is controlled with an enclosed case remote. The image is displayed on the touchscreen display. The mobile robot is programmed and fully assembled complete with remote and charger. No additional equipment is needed to get started!
The robot has a PTZ dome camera mounted on the front, so you can see where you are going and inspect everything around the robot. The pan goes 360 degrees and the tilt is 0 to +90 degrees. The camera has a 10X optical zoom. A second fixed camera is provided that faces in the rear to check on the tether and back out of the pipe or culvert. All the camera functions are controlled from the remote as you stream the video.
The robot comes with a 152m tether with cable spool for easy deployment of the robot and use the hand crank to neatly wind the cable back up. LED lights are also included on the front and back of the robot to illuminate whatever the camera is facing. The lights can be remotely turned on and off using the controller.
- Remote Inspection - Remotely inspect areas that are not easily accessible to people. Record the video feed on the controller!
- Entry into difficult areas - This tracked robot is very quick and has the ability to traverse many obstacles that often stop other robots.
- Pipe and Culvert Inspection - Compact and lightweight to easily fit down pipes, ducts, culverts, etc. as you control this robot from the supplied remote.
Have a question?
